12/30/2011

PureSpectrum 20W Fully Dimmable Spiral CFL(2 Pack) 2700K 6000 hours (75W Equivalent) Review

PureSpectrum 20W Fully Dimmable Spiral CFL(2 Pack) 2700K 6000 hours (75W Equivalent)
Average Reviews:

(More customer reviews)
These PureSpectum CFLs dim perfectly and they instantly turn on when you flip the switch. No flicker, no buzzing sound, and no waiting to warm up! These are the real deal. I replaced all of my incandescent lightbulbs on dimmer switches with these PureSpectrum CFLs. They emit a soft white/yellow glow.

Click Here to see more reviews about: PureSpectrum 20W Fully Dimmable Spiral CFL(2 Pack) 2700K 6000 hours (75W Equivalent)



Buy Now

Click here for more information about PureSpectrum 20W Fully Dimmable Spiral CFL(2 Pack) 2700K 6000 hours (75W Equivalent)

Read More...

12/29/2011

Lutron MA-T530G-WH Maestro Countdown eco-timer Switch, White Review

Lutron MA-T530G-WH Maestro Countdown eco-timer Switch, White
Average Reviews:

(More customer reviews)
I was not sure that this item would work, as I have purchased previous timers from my local hardware store that were not powerful enough; I guess. I did not need to connect the white wire for a complete installation. It controls my bathroom fan without fault. I'm glad to never have to worry about leaving the fan on all day again. Will buy more for all of my bathroom.

Click Here to see more reviews about: Lutron MA-T530G-WH Maestro Countdown eco-timer Switch, White



Buy Now

Click here for more information about Lutron MA-T530G-WH Maestro Countdown eco-timer Switch, White

Read More...

12/28/2011

Can Converter Recessed Can Light Conversion Kit 4" Review

Can Converter Recessed Can Light Conversion Kit 4
Average Reviews:

(More customer reviews)
I am a remodeling contractor, and I installed this product for a client. This is a useful product for people wishing to have a different lighting system where recessed fixtures are installed, e.g. a pendant over an island. Available for 4", 5", and 6" cans, I used the 4" model. Installation is straightforward, however, I think the instructions should highlight some variations; in some cases it's easier to cut the incoming wires and splice to the new fixture, rather than try to use the screw-in adaptor. Also, I had to tap new hole in the mounting plate, as the existing holes were defective. Aside from these issues, it's a good product and I will use again.

Click Here to see more reviews about: Can Converter Recessed Can Light Conversion Kit 4"



Buy Now

Click here for more information about Can Converter Recessed Can Light Conversion Kit 4"

Read More...

12/27/2011

Leviton 10097-8 Pull Chain Switch, Single Pole On-Off; 1A-125V T, 3A-125V, 1A-250V; With Two 6 Inch Black Leads 18 Awg Awm Tew 105C 600V, Stripped 1/2 Inch Review

Leviton 10097-8 Pull Chain Switch, Single Pole On-Off; 1A-125V T, 3A-125V, 1A-250V; With Two 6 Inch Black Leads 18 Awg Awm Tew 105C 600V, Stripped 1/2 Inch
Average Reviews:

(More customer reviews)
I bought a duel florescent shop light with outlet plug for $15.00 for my garage. I ordered the Leviton pull chain switch for $2.00 + shipping. I then took the black power line in and spliced (twist caps) the switch in between it and the transformer. Use a 3/16 drill bit to make the opening and you have a pull switch for your light. Or, don't take 5-minutes of your time and spend $40.00 for the same shop light with pull switch. Your choice.

Click Here to see more reviews about: Leviton 10097-8 Pull Chain Switch, Single Pole On-Off; 1A-125V T, 3A-125V, 1A-250V; With Two 6 Inch Black Leads 18 Awg Awm Tew 105C 600V, Stripped 1/2 Inch

Compact, single pole On Off pull chain switch with 3 3 4" chain, connector, 3' braided cord, end bell, and black leads. 3A 125V AC, 1A 125VT, 1A 250V AC. UL listed. Bulk pack.

Buy Now

Click here for more information about Leviton 10097-8 Pull Chain Switch, Single Pole On-Off; 1A-125V T, 3A-125V, 1A-250V; With Two 6 Inch Black Leads 18 Awg Awm Tew 105C 600V, Stripped 1/2 Inch

Read More...

12/26/2011

Arlington 8081F Siding Box Kit Review

Arlington 8081F Siding Box Kit
Average Reviews:

(More customer reviews)
Had serveral of these on my house from when it was built. Needed a few more due to we were adding a few exterior lights and outlets that needed to be mounted on the siding. Went to the Contractors Whse that purchased the Whse the siding was originally purchased from. They did not carry this product anymore and I could not find something close. I hate miss matching stuff. I googled siding boxs, got a name of the manufacturer then went to Amazon. Found what I needed at a reasonalbe price. Got them and they were exactly what I had.

Click Here to see more reviews about: Arlington 8081F Siding Box Kit



Buy Now

Click here for more information about Arlington 8081F Siding Box Kit

Read More...

12/25/2011

Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board Review

Hole Pro X-148 Kit: 1-7/8 to 5-7/8 and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board
Average Reviews:

(More customer reviews)
I bought this tool to cut duct outlets for high velocity AC systems I install from Unico. I have used the X-305 model for Airtec MV diffusers and this smaller size uses the same blades and has the same great build quality.
It is easy to adjust the size hole and I can use a cordless drill to cut holes where if I used a hole saw I would need to use a cord drill and an extension cord and worry about clean cuts and have all the dust and shavings to cleanup afterwards. I used it with the high speed steel blades to cut 20 holes in a 5/8" tongue and groove wood ceiling for 5 inch light cans in less than an hour. And I used an old 18 volt Milwaukee cordless drill that uses NiCad battery packs.
I even cut speaker holes in my boat using the tungsten carbide blades to cut holes through the gelcoat and fiberglass. For a tight fit I needed to make a 5-1/8" cutout for the waterproof speakers. Try to find a hole saw that is 5-1/8" - it does not exist.
The 7 inch diameter shield makes it easy to get the tool in tight spaces or close to the edge of a soffit or cabinet and also keeps the cutter perpendicular. I like that I can adjust how deep it cuts so I don't need to worry about cutting something hidden behind the wall or clipping a beam.
The storage case is very high quality, and much better than the cases with the tools I have bought. I like having everything I need in a single case, including spare blades.
I like to buy a tool that will last for many years of use and the Hole Pro hole cutters are that kind of tool. Everything about them is first class.


Click Here to see more reviews about: Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board



Buy NowGet 7% OFF

Click here for more information about Hole Pro X-148 Kit: 1-7/8" to 5-7/8" and all fractional sizes in between. Infinitely Adjustable Cutter with Twin Tungsten Carbide Blades cut fast using ¼ drill power of hole saw - Cut Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie Board

Read More...

12/24/2011

Colorful Dragonfly Porcelain Fan / Light Pull Review

Colorful Dragonfly Porcelain Fan / Light Pull
Average Reviews:

(More customer reviews)
I ordered 2 fan pulls with 2 different pictures. They both are awesome! They are very well made, easy to put on and look fantastic.

Click Here to see more reviews about: Colorful Dragonfly Porcelain Fan / Light Pull



Buy NowGet 40% OFF

Click here for more information about Colorful Dragonfly Porcelain Fan / Light Pull

Read More...

12/23/2011

Uttermost 28551, Jolie Transitional Floor Lamp Review

Uttermost 28551, Jolie Transitional Floor Lamp
Average Reviews:

(More customer reviews)
I installed this light kit myself on the hunter ceiling fan.
It installed easily and looks great.
My only regret is it uses candelabra base light bulbs.
I wish it used standard bulbs.

Click Here to see more reviews about: Uttermost 28551, Jolie Transitional Floor Lamp



Buy Now

Click here for more information about Uttermost 28551, Jolie Transitional Floor Lamp

Read More...

12/22/2011

Whimsical Blue Crab Tiki Bar Dining Fan Light Pull Chain Review

Whimsical Blue Crab Tiki Bar Dining Fan Light Pull Chain
Average Reviews:

(More customer reviews)
I am so disappointed in this. It is complete crap. As soon as I took this adorable, brightly colored cool little crab out of the bag, a claw broke off. I was sad, but nonetheless hung her up for the time being until at some future never-going-to-happen point in time I may want to superglue her claw back on. Later that very same day, I tugged on Mizzes Crab hoping to be flooded with the light from the ceiling fan. Unfortunately, the gentle pressure of tugging on her was just too much and the chain snapped right out of Mizzes Crab belly :-( Much to my relief the flying chain did not snap all the way up to be snarled up in the moving ceiling fan which would have spelled complete disaster for the fan. I stood there, holding my treasured little crab in my hand, in complete disbelief that she did not want to have purpose in life of being the light pull to my ceiling fan.
She received a burial in the trash.
Interestingly, I ALSO purchased an airplane pull for my son. It arrived with a broken propeller. It lasted about 2 days of a boy pulling on his closet light to lose the chain. Because my son is so attached to the airplane, I managed to jimmy-rig it so hopefully the chain will stay properly seated in the aircraft at all time. Its only been 3 days though.

Click Here to see more reviews about: Whimsical Blue Crab Tiki Bar Dining Fan Light Pull Chain



Buy Now

Click here for more information about Whimsical Blue Crab Tiki Bar Dining Fan Light Pull Chain

Read More...

12/21/2011

Monte Carlo MC07OC Opal Teardrop Wet Location Light Kit, Old Chicago Review

Monte Carlo MC07OC Opal Teardrop Wet Location Light Kit, Old Chicago
Average Reviews:

(More customer reviews)
Ordered to go with the matching fan - which was purchased from another vendor. If only the vendor could have sold everything together - that would be perfect! Light works well and is located in outdoor patio.

Click Here to see more reviews about: Monte Carlo MC07OC Opal Teardrop Wet Location Light Kit, Old Chicago

Monte Carlo Fans MC07OC Opal Teardrop Glass Wet Location Light Kit Old Chicago

Buy NowGet 2% OFF

Click here for more information about Monte Carlo MC07OC Opal Teardrop Wet Location Light Kit, Old Chicago

Read More...

12/20/2011

Aube by Honeywell TH104/U Electric Heating 7-Day Programmable Thermostat Review

Aube by Honeywell TH104/U Electric Heating 7-Day Programmable Thermostat
Average Reviews:

(More customer reviews)
I like this product, its very easy to install, its quiet, and its accurate. Readout shows time and temp however it is not backlit which is not a problem for me where I have it installed but could be if its in a bedroom . I control a baseboard heater with it. None of these programable products are the easiest to program but if you want it......it does it. This one is no better at that than any other. I run it on manual . Instructions say it can be run on 110V as well as 220V. Its a good unit and I would buy it again.

Click Here to see more reviews about: Aube by Honeywell TH104/U Electric Heating 7-Day Programmable Thermostat

The TH104 provides the ultimate in temperature control with the most accurate type of thermostat on the market (±0.15ºC / 0.27ºF). To be used with electric heating systems, this programmable thermostat includes TRIAC switching to eliminate temperature swi

Buy NowGet 27% OFF

Click here for more information about Aube by Honeywell TH104/U Electric Heating 7-Day Programmable Thermostat

Read More...

12/19/2011

DIMMABLE CFL 14 WATT MINI SPIRAL 27K COMPACT FLUORESCENT DIMMING LIGHT BULB SUPRA LIFE WARM TONE Review

DIMMABLE CFL 14 WATT MINI SPIRAL 27K COMPACT FLUORESCENT DIMMING LIGHT BULB SUPRA LIFE WARM TONE
Average Reviews:

(More customer reviews)
Finally, a dimmable CFL that fits into the light fixture on my ceiling fan! This bulb is the same height as an incandescent light bulb, and so should fit into all regular fixtures without sticking out. Like all dimmable CFLs, it does not dim as much as an incandescent bulb, the dimmed light is a bit harsh, and there is a slight buzz at the lowest setting. However, that is typical of dimmable CFLs. The compact size is the selling point for me.

Click Here to see more reviews about: DIMMABLE CFL 14 WATT MINI SPIRAL 27K COMPACT FLUORESCENT DIMMING LIGHT BULB SUPRA LIFE WARM TONE



Buy NowGet 25% OFF

Click here for more information about DIMMABLE CFL 14 WATT MINI SPIRAL 27K COMPACT FLUORESCENT DIMMING LIGHT BULB SUPRA LIFE WARM TONE

Read More...

12/18/2011

Disney Cars Double Toggle Switch Plate Review

Disney Cars Double Toggle Switch Plate
Average Reviews:

(More customer reviews)
This switchplate cover added the finishing touches to our grandson's *Cars* themed room. It looks good and has a wonderful shiny finish that should be able to be cleaned with no problem. 5 STARS! *****

Click Here to see more reviews about: Disney Cars Double Toggle Switch Plate



Buy NowGet 9% OFF

Click here for more information about Disney Cars Double Toggle Switch Plate

Read More...

12/17/2011

Rotary speed controller with on-off switch, 5 amp 115VAC 0 -100% Variable speed Control Fantech-WC15 Review

Rotary speed controller with on-off switch, 5 amp 115VAC 0 -100% Variable speed Control Fantech-WC15
Average Reviews:

(More customer reviews)
Take a pass on this one.
Switch looked like a piece of junk the minute I unpacked it.
Needs a full 2" box as the wires come out the back although there's plenty of room for them to come out the sides. If you have a new home or a switch box in your range hood, make sure its large enough.
No strain relief on any wires.
Bracket a bit too large to fit flush in an electrical box. Thus, the plate sticks out. Need to trim 1/8th inch off each end.
Not a solid state switch. Its a cheap rotary.
Feels like junk with the knob wobbling the minute you touch it.
Did not work as a variable switch (new 2 amp fan installation). Only worked on/off.
You know where its made.

Click Here to see more reviews about: Rotary speed controller with on-off switch, 5 amp 115VAC 0 -100% Variable speed Control Fantech-WC15



Buy Now

Click here for more information about Rotary speed controller with on-off switch, 5 amp 115VAC 0 -100% Variable speed Control Fantech-WC15

Read More...

12/16/2011

Fasco K612 1/65 HP 115 Volt 3000 RPM Vent Fan C-Frame Motor Review

Fasco K612 1/65 HP 115 Volt 3000 RPM Vent Fan C-Frame Motor
Average Reviews:

(More customer reviews)
I have a Lopi Freedom Bay fireplace insert with blower assembly. The blower assembly typically lasts only two to three years before a motor (there are two) will get noisy and needs to be replaced. Well, Travis Industries (manufacturer of Lopi units) does not sell replacement parts. I had to do a lot of research because they spray paint the motors black thus not allowing any data to be retrieved. Well, I carefully removed the black paint and got enough of the specs to contact Fasco motors with the data. They pointed me to this motor assembly. You have to cut the plug off and connect the unit into the blower assembly wires. With just a little electrical experience you should be able to do this. You will have to replace the pop rivets to take the assembly apart and put it back together. But where I live, the blower assembly goes for over $400 and this fan was a mere $32 with shipping. Nice find and excellent product!

Click Here to see more reviews about: Fasco K612 1/65 HP 115 Volt 3000 RPM Vent Fan C-Frame Motor

C-Frame. Skeleton Motors are found in many fan applications such as bath fans, hood fans and humidifier/dehumidifers. Rotation is determined facing the shaft. (CW-clockwise, CCW-counterclockwise). Motors have 2 - 6" wire leads. All these style motors have the exact same mounting pattern for the studs. Replaces UPPCO 99080145, BROAN 162, 7002-2281

Buy NowGet 42% OFF

Click here for more information about Fasco K612 1/65 HP 115 Volt 3000 RPM Vent Fan C-Frame Motor

Read More...

12/15/2011

G E Lighting Ge4w Par16 Led Fld Bulb 75626 Light Bulbs Specialty Purpose Review

G E Lighting Ge4w Par16 Led Fld Bulb 75626 Light Bulbs Specialty Purpose
Average Reviews:

(More customer reviews)
Very good white light unlike other LED Lamps. Runs much cooler than the incandescent bulb it replace. Vent holes in Curio are no longer needed. A bit pricey but the best LED I have purchased so far.

Click Here to see more reviews about: G E Lighting Ge4w Par16 Led Fld Bulb 75626 Light Bulbs Specialty Purpose



Buy NowGet 13% OFF

Click here for more information about G E Lighting Ge4w Par16 Led Fld Bulb 75626 Light Bulbs Specialty Purpose

Read More...

12/14/2011

Air King AKLC701 Decorative Quiet Round Bath Fan with Light, Bronze Review

Air King AKLC701 Decorative Quiet Round Bath Fan with Light, Bronze
Average Reviews:

(More customer reviews)
NICE UNIT. NOT INSTALLED YET. TOO HOT TO WORK IN ATTIC.....PACKED IN 3 BOXES FOR SAFEKEEPING!

Click Here to see more reviews about: Air King AKLC701 Decorative Quiet Round Bath Fan with Light, Bronze

Decorative bathroom exhaust fan with light includes grill, 13-1/2" diameter with ribbed frosted glass light lens. Two - 60 watt maximum light capacity, bulbs not included. One piece polymeric wheel.Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Mounted in ceiling. Rated Type IC. UL Listed. HVI Certified.

Buy Now

Click here for more information about Air King AKLC701 Decorative Quiet Round Bath Fan with Light, Bronze

Read More...